Recently, the Home Minister of India inaugurated the campus of NSG Regional Hub at_____.
Coating of solid waste with impervious material is known as-
From the given alternative words, select the word which cannot be formed using the letters of the given word:
UNCONTAMINATED
Ashok remembers his birthday is after 21st December. While his mother remembers his birthday is before 23rd December. On which date of December is his birthday?
A carriage driving in a fog passed a man who was walking at the rate of 3 km an hour in the same direction. He could see the carriage for 4 minutes and it was visible to him upto a distance of 100 m. What was the speed of the carriage?
What is called to transfer a data from one place to another?
In the Indirect method of contouring, the best method of interpolation of the contour is by -
Which of the following statements in respect of a map A having a scale of 1 : 2000 and another map B having a scale of 1 : 10000 is true?
The minimum clear cover (in mm) for footing, according to IS 456 : 2000, shall be
In beams the maximum area of the reinforcement in tension reinforcement shall not exceed
The relation between
K = Bulk Modulus
E = Young's Modulus and
G = Modulus of rigidity is given by
For a cantilever beam, the span to depth ratio for span upto 10 m is,
The best method of interpolation of contours is by-
Minimum thickness of load-bearing RCC wall should be-
For a continuous floor slab supported on beam, the ratio of the end span of length and intermediate span length is-
A railway curve of 1350 m radius is to be set out to connect two tangents. If the design speed is 110 kmph and the rate of change of acceleration is 0.3 m/s3, the shift of the circular curve will be nearly
A 100 m tape is suspended between the ends under a pull of 200 N. If the weight of the tape is 30 N, the correct distance between the tape ends will be nearly
The combined correction for curvature and refraction for a distance of 3400 m will be nearly
Water cement ratio is generally expressed volume of water required per-
The length of the straight portion of a bar beyond the end of the hook should be at least-