NEET Exam  >  NEET Tests  >  AIIMS CRE Group B & C Mock Test Series  >  AIIMS CRE Civil JE/AE Mock Test- 5 - NEET MCQ

AIIMS CRE Civil JE/AE Mock Test- 5 - NEET MCQ


Test Description

30 Questions MCQ Test AIIMS CRE Group B & C Mock Test Series - AIIMS CRE Civil JE/AE Mock Test- 5

AIIMS CRE Civil JE/AE Mock Test- 5 for NEET 2025 is part of AIIMS CRE Group B & C Mock Test Series preparation. The AIIMS CRE Civil JE/AE Mock Test- 5 questions and answers have been prepared according to the NEET exam syllabus.The AIIMS CRE Civil JE/AE Mock Test- 5 MCQs are made for NEET 2025 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for AIIMS CRE Civil JE/AE Mock Test- 5 below.
Solutions of AIIMS CRE Civil JE/AE Mock Test- 5 questions in English are available as part of our AIIMS CRE Group B & C Mock Test Series for NEET & AIIMS CRE Civil JE/AE Mock Test- 5 solutions in Hindi for AIIMS CRE Group B & C Mock Test Series course. Download more important topics, notes, lectures and mock test series for NEET Exam by signing up for free. Attempt AIIMS CRE Civil JE/AE Mock Test- 5 | 100 questions in 90 minutes | Mock test for NEET preparation | Free important questions MCQ to study AIIMS CRE Group B & C Mock Test Series for NEET Exam | Download free PDF with solutions
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 1

Thiamidine Dimer formation in DNA is caused by-

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 1
Cyclobutane thymine dimer is a photo lesion produced by UV radiation in sunlight and is considered a potential factor causing skin cancer. It is formed as a covalently bonded complex of two adjacent thymines on a single DNA strand.
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 2

Which answer figure will complete the pattern in the question figure?

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 3

If the volume of two cubes is in the ratio 125 : 1, then what is the ratio of their edges?

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 3
volume of cube1 =
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 4

In structure, Muller Breslau Principle is used for:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 4
The Müller-Breslau principle is a method to determine influence lines. The principle states that the influence lines of action (force or moment) assumes the scaled form of the deflection displacement.
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 5

In a turbulent flow in a pipe, the shear stress is:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 5
For turbulent flow, shear stress

Where r0 = radius of the pipe

t0 = shear stress at the boundary

y = distance from the pipe wall

Hence the correct answer is option B.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 6

If the thickness of the thinnest outside plate is 20 mm, then the maximum pitch of rivets in tension will be taken as -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 6
Maximum pitch of rivets in tension = 16t or 200 mm, whichever is less

Here, 16× 20 = 320 mm,

Therefore pitch = 200 mm

Hence the correct answer is option C.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 7

For ranging a line, the number of ranging rods required is -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 7
Two rods at both end stations and one rod in the middle of the two stations for direct running.

Hence the correct answer is option B.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 8

The process involved in Chlorination before breakpoint chlorination are-

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 8
The processes involved in chlorination before Breakpoint chlorination

(i) Plain

(ii) Pre

(iii) Post

(iv) Double Chlorination

Hence the correct answer is option C.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 9

Which of the following method is used for speed and delay study?

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 9
We use different methods like the Floating-car method, moving-vehicle method, ANPR, videos, and GPS to study the accurate Travel Time and Delay surveys.

Hence, the correct option is (b).

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 10

The coefficient of curvature for a well-graded soil must be in the gauge -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 10
Coefficient curvature or the coefficient of gradation or coefficient of concavity ((Cc))

(Cc= D302/D60×D10)

For well-graded soil should be between 1 to 3.

I.e. (1≤Cc≤3)

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 11

The detention period for oxidation ponds is usually kept is -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 11
Oxidation ponds have a long detention period between 10 to 15 days.The BOD removal efficiency of an oxidation pond lies between 80% and 90%, so the maximum BOD removal efficiency is 90%.
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 12

For determining the ultimate bearing capacity of soil, the recommended size of square bearing plate used in place load test is 30 – 75 cm with a minimum thickness of:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 12
In the plate load test, the rigid bearing plate to be used is square in section, of minimum size (30cm×30cm, ) and maximum size (75cm×75cm). The plate thickness should be sufficient to withstand effectively the bending stresses likely to be caused by the maximum anticipated load. It should generally not be less than 1cm(10cm)
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 13

Undisturbed samples are obtained by -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 13
Thin-walled samplers-

Thin-walled cre samplers are most commonly used for the collection of undisturbed core samples in cohesive soils, silt, and sand above the water table.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 14

Coefficient of permeability of soil varies approximately as -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 14
Factors affecting permeability (K)-

1. Gravity size (K∞D102)

2. Properties of water (K∝γW/μ)

( → ) With increases temperature, viscosity (μ) Decrease; and hence K increases

3. The Void ratio of soil (−K∞e2)

4. Degree of saturation (−K∞S)

5. Shape of particles

(−K∞1/s2) (Specific surface area s= Surface Area/ Volume)

6. Temperature - ( K ) Temp

7. Impurities present in water block the voids, and hence permeability reduces

8. Adsorbed water hinders the flow under gravity. Hence K is reduced.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 15

The most durable varnish is -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 15
  • Varnish is a nearly homogeneous solution of resin in oil, alcohol, or turpentine

  • Oil-based varnish is the most durable finish that can be easily applied by the average woodworker

  • This varnish surpasses most other finishes in its resistance to

  1. water,

  2. heat,

  3. solvents

  4. other chemicals

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 16

The size of modular brick is -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 16
Standard brick, modules brick, actual brick size 19×9×9 cm.

And nominal brick size = modular brick +mortar =20×10×10 cm.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 17

Age of a tree may be ascertained by -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 17
The second most accurate way to estimate tree age is to count the annual rings of wood growth. Annual rings can be counted using two different methods. We can extract an increment core from the tree using an increment borer.
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 18

Generally, wooden mould are made from -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 18
Generally, wooden moulds are made from Sheesham wood.

Hence the correct answer is option B.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 19

If the diameter of a capillary tube is doubled, the capillary rise will be:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 19
Capillary height

((hc)=4σcos⁡θ/wd)

(⇒hc∞1/d)

Hence, If the diameter of a capillary tube is doubled, the capillary rise will be halved.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 20

The magnitude of the buoyant force can be determined by -

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 20
Archimedes’s principle

When a body is immersed in fluid, either wholly or partially, it is buoyed or lifted up by a force that is equal to the weight of the fluid displaced by the body.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 21

A sample of saturated clay has a porosity of 0.562. The void ratio of the clay is;

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 21

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 22

The maximum strain in the tension reinforcement in the section at failure shall not be less than:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 22
The maximum strain in the tension reinforcement in the section at failure shall not be less than: ((fy/1.15Es) + 0.002)

Hence the correct answer is option A.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 23

The degree of workability is medium when the value of slump in mm is:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 23

The workability of concrete is classified based on its slump value, which is an important measure of its consistency and ease of handling. The classifications are as follows:

  • Low workability: 25–50 mm
  • Medium workability: 50–100 mm
  • High workability: 100–175 mm
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 24

The value of the property realized when it becomes absolutely useless except for sale as junk is known as

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 24
Scrap value is the worth of a physical asset's individual components when the asset itself is deemed no longer usable. The individual components, known as scrap, are worth something if they can be put to other uses. Sometimes scrap materials can be used as-is and other times they must be processed before they can be reused. An item's scrap value—also called residual value, break-up value, or salvage value—is determined by the supply and demand for the materials it can be broken down into.
AIIMS CRE Civil JE/AE Mock Test- 5 - Question 25

The saturated unit weight of the soil sample having specific gravity = 2.66, void ratio = 0.63 and unit weight of water = 9.81 kN/m3 is:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 25

The relation between the degree of saturation (S), voids ratio (e), moisture content (W), and specific gravity (G) is given by,

e × S = W × G

The relation between the unit weight of saturated soil (γ­Sat), specific gravity (G), unit weight of water (γ­W), and voids ratio (e) is given by

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 26

To form a still water pocket in front of the canal head, the following is constructed:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 26

The functions of the divider wall are as follows

To form a still water pocket in front of the canal head so that the suspended silt can be settled down which then later be cleaned through the scouring sluices from time to time.

It controls the eddy current or crosses current in front of the canal head.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 27

As per IS code, concrete should be cured at

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 27
As per IS code, concrete should be cured at (270C).

Hence the correct answer is option C.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 28

Quartzite and marble are by nature

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 28

Marble and quartzite are both natural metamorphic rocks. However, they were metamorphosed from different sedimentary rocks. Marble was metamorphosed from limestone that was formed in the ocean environment while quartzite came from sandstone formed in the land river environment.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 29

In an open channel flow, the maximum velocity occurs:

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 29

Maximum velocity in a channel section often occurs below the free surface. It is achieved by velocity distribution equation derived by applying the probability and entropy concepts.

AIIMS CRE Civil JE/AE Mock Test- 5 - Question 30

In a pipe when the valve is closed suddenly, then due to high pressure

Detailed Solution for AIIMS CRE Civil JE/AE Mock Test- 5 - Question 30

During sudden closure of valve, a wave of high pressure intensity will be produced in the water, due to this high pressure circumferential and longitudinal stresses will be produced.

View more questions
25 tests
Information about AIIMS CRE Civil JE/AE Mock Test- 5 Page
In this test you can find the Exam questions for AIIMS CRE Civil JE/AE Mock Test- 5 solved & explained in the simplest way possible. Besides giving Questions and answers for AIIMS CRE Civil JE/AE Mock Test- 5, EduRev gives you an ample number of Online tests for practice
Download as PDF